24v to 12v solar charge controller
EPever XTRA series solar Charge Controller 20A 30A 40A LCD Solar Regulator 12V 24V 48v Auto Tracer1210N 2210N 3415N 4415N TOP
EPever XTRA series solar Charge Controller 10A 20A 30A 40A LCD Solar Regulator 12V 24V Auto Tracer1210N 2210N 3210N 4210N TOP
XTRA N series controller which can carry different display units(XDB1/XDS1/XDS2) adopt the advanced MPPT control algorithm, it can minimize the maximum power point loss rate and loss time, quickly track the maximum power point(MPP) of the PV array and obtain the maximum energy from solar array under any conditions; and it can increase the ratio of energy utilization in the solar system by 20%-30% compared with PWM charging method.
Limiting the charging power & current and reducing charging power functions ensure the system stable with over PV modules in high temperature environment. IP33 Ingress protection and isolated RS485 design further improve the controller’s reliability and meet the different application requirements.
XTRA N series controller owns self-adaptive three-stage charging mode based on digital control circuit, which can effectively prolong the lifespan of battery and significantly improve the system performance. It also has comprehensive electronic protection for overcharge, overdischarge, PV & battery reverse polarity etc, to ensure the solar system more reliable and more durable. This controller can be widely used for RV, household system, field monitoring and many other applications.
Features：
CE certification(LVD EN/IEC62109,EMC EN61000-6-1/3)
100% charging and discharging in working environment temperature range
Optional LCD display units (XDB1/XDS1/XDS2)
High quality and low failure rate components of ST or IR to ensure service life
Advanced MPPT technology & ultra-fast tracking speed guarantee tracking efficiency up to 99.5%
Maximum DC/DC transfer efficiency is as high as 98.3%★, full load efficiency is up to 97.3%★
Advanced MPPT control algorithm to minimize the MPP lost rate and lost time
Accurate recognizing and tracking of multi-peaks maximum power point
Wide MPP operating voltage range
Support the lead-acid and lithium batteries, programmable temperature compensation
Limit charging power & current over rated value
Real-time energy statistics function
Power reduction automatically over temperature value
Multiple load work modes
Comprehensive electronic protection
Isolated RS485 with 5V/200mA protected output for no power devices, with Modbus protocol
Support monitoring and setting the parameters via APP or PC software
IP33▲Ingress protection
★XTRA3415N@48V system
▲3-protection against solid objects: protected against solids objects over 2.5mm.
3-protected against sprays to 60°from the vertical.
10A/20A/30A PWM Dual Battery Solar Charge Controller for 12V 24V Battery Solar Power Panel Battery Regulator
Specification:
Brand new
Current: 10A / 20A / 30A (optional)
Size: approx. 133*70*35mm
System voltage: 12V/24V adaptive
Maximum photovoltaic voltage: 41V
Voltage drop of charging circuit: <0.2V
Boost charging voltage: 14.6V (only for 12V system, if using 24V system, please ×2)
Direct charging voltage: 14.5V (only for 12V system, if using 24V system, please ×2)
Constant voltage charging voltage: 14.2V (only for 12V system, if using 24V system, please ×2)
Float voltage: 13.8V (only for 12V system, if using 24V system, please ×2)
Charging recovery voltage: 13.0V (only for 12V system, if using 24V system, please ×2)
Adjustment method: PWM
Standby current: < 10mA
Temperature Compensation: N/C
Working temperature: -35~+60℃
Feature:
Solar Charge Controller for managing battery charging which helps to increase a batteries lifetime by preventing overcharging.
Batteries must be 12V or 24V. Controller does not charge a 12V and 24V battery.
Built in Industrial Microcontroller.
State of charge (SOC) showing battery condition.
Pulse Width Modulation with four stages of charging.
Short circuit, Reverse current, Reverse polarity, Lightning protection, Overcharge protection.
Fine workmanship and good performance.
Easy to use.
Long service life.
Package Included:
1pc x Solar Charge Controller Regulator
Note:
Please allow 0-1cm size errors due to manual measurement.
Due to different monitor calibrations, the colors of the items shown in the photos may appear slightly different on your computer monitor.
New PWM 10A 20A 30A Solar Charge Controller Auto 12V 24V PV Regulator Dual USB Compatibled With Lifepo4 Lithium GEL Lead Acid
* Three-stage PWM regulation charging. It adopts direct charge, boost charge, and float charge three-stage PWM regulation charging mode. The applicable controller realizes efficient and fast intelligent charging, and effectively prolongs the service life of the battery.
* Light control and time control. With light control and time control function, the discharge can be controlled by sunlight and time.
* Four major protections, built-in over-current, short-circuit protection, reverse connection protection, and open-circuit protection, all of which are automatically restored without damaging the controller.
* Suitable for a variety of batteries. Suitable for lead-acid batteries, lithium iron phosphate batteries, ternary lithium batteries and other batteries, more convenient.
Specification:
Name: Solar PWM Controller
Material: ABS
charging current: 10A/20A/30A
The highest photovoltaic voltage: 12V system <25V, 24V system <50V
USB output: 5V/2A Max
Standby current: <10ma
Applicable battery: lead-acid battery / ternary lithium battery / lithium iron phosphate battery
Working environment temperature: -35℃~+60℃
Size: 133 * 70 * 35mm
Packing included:
1 * Solar PWM Controller
Note:
1. Please allow 1-3cm (0.4-1.18") difference due to manual measurement and slight color variation for different display setting.
2. Due to the light and screen difference, the item's color may be slightly different from the pictures. Please understand.
100A/50A/40A/30A/20A/10A 12V 24V Auto Solar Charge Controller MPPT/PWM Controllers LCD Dual USB Output Solar Panel PV Regulator
Only PWM function, please note before purchase
Description:
Feature：
- Advanced maximum power point tracking (MPPT/PWM) technology, the efficiency is not less than 99.5%. High-quality components improve the system performance, and the maximum conversion efficiency is 98%. Super fast tracking speed and guarantee tracking efficiency.
- Large screen LCD display, charge and discharge current display, cumulative power generation and discharge power query, temperature display, light control delay control; adjustable charge and discharge parameters, with power-off memory and other functions.
- Dual USB output, the maximum current is 2.5A. Equipped with all necessary protection devices, the control parameters of the system are adjustable, easy to set up and operate. Built-in overheating, overcurrent, short circuit, open circuit protection, fault elimination, controller automatic recovery. Two-way MOS tube anti-backflow circuit, high-power charging mode, ultra- heat.
- Built-in short circuit protection, open circuit protection, reverse connection protection, overload protection. Reverse current protection, low calorific , with self-recovery function, will not damage the controller.
- Real-time display of temperature, charging current and discharge current. Current autofocus MPPT tracking charging, high charging efficiency, charging process does not stop detection, two-way focus tracking.
Specifications:
Name: LCD screen solar controller
Voltage: DC 12V / 24V
Display: LCD screen
Self-consumption: <10MA
Overcharge protection: 14.4V / 28.8V
Overcharge Float charge: 13.7V / 27.4V
Charge recovery voltage: 12.6V / 25.2V
Over discharge protection: 10.7V / 21.4V
Over discharge recovery: 12.6V / 25.2V
Dual USB output: 5V / 2A (charge mobile phone, iPad, etc.)
Working temperature: -35 ℃ -60 ℃
12V fits 18V solar panel, 24V fits 36V solar panel
12.0 volt lead acid battery corresponding
The float voltage is set to: 13.6
The recovery discharge voltage is set to: 12.6
The discharge cut-off voltage is set to: 10.7
12.8 volt lithium iron phosphate battery corresponding
The float voltage is set to: 14.6
The recovery discharge voltage is set to: 13.6
The discharge cut-off voltage is set to: 11.0
11.1 volt lithium battery corresponding
The float voltage is set to: 12.6
The recovery discharge voltage is set to: 11.6
The discharge cut-off voltage is set to: 9.6
The minute is adjustable when the output is turned off, which is more convenient (there is no adjustment when the market is only available).
PV system power Description:
10A/20A/30A / 40A / 50A/ 60A /70A/80A/90/100A battery 12V photovoltaic system: power is respectively 100-1000W
10A/20A/30A / 40A / 50A/ 60A /70A/80A/90/100A battery 24V photovoltaic system: power is respectively 200-2000W
Package Included:
1X Solar Panels Battery Charge Controller
1X User Manual
Notes:
1. The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL, it is not suited for nickel hydride, lithium, Liions, or other batteries.
2. This controller can only use photovoltaic panels as charging power. Do not use DC or other power as charging power.
3.The LCD display has an error of 0.2 V- 0.3 V, but this is normal
4. Old batteries may be degraded the capacity after hundereds of cycles, easily drop lower than 8V, which results in the controller will be shut off (LCD screen become totally “DEAD”).
5. Indoor use only: the working temperature of this controller is -35°C to 60°C, during hot sunny days, the temperature outside might go up to 60-75°C. Please do keep the controller stay in cool and well-ventilated place to maintain good heat dissipation.
Solar PV Charge Controller 30A/20A/10A 12V 24V with LCD display and double USB PWM Solar PV Regulators Battery Chargers 30Amps
Solar PV Charge Controller 30A/20A/10A 12V 24V with LCD display and double USB PWM Solar PV Regulators Battery Chargers 30Amps
This controller is a intelligent, multi-purpose solar charge and discharge controller. Fixed LCD display with a very friendly interface is used in this product; various control parameters can be flexibly set, fully meet your various application requirements.
There are optional 10A 20A 30A model
10A:
if your battery is 12V ,the max solar panel input is 25V 120W
if your battery is 24V ,the max solar panel input is 50V 240W
20A:
if your battery is 12V, the max solar panel input is 25V 240W
if your battery is 24V, the max solar panel input is 50V 480W
30A
if your battery is 12V ,the max solar panel input is 25V 360W
1.Build-in industrial micro controller.
2.Big LCD display,all adjustable parameter.
3.Fully 4-stage PWM charge management.
4.Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection.
MODEL | PWM 1210 | PWM 1220 | PWM 1230 | |
Battery Voltage | 12V 24V Auto | |||
Charging Current | 10A | 20A | 30A | |
Discharging Current | 10A | 10A | 10A | |
Max Solar input | 50V(for 24V battery) 25V(for 12V battery) | |||
Equalization | 14.4V(Sealed) 14.2V(Gel) 14.6V(Flood) | |||
Float charge | 13.7V(defaul,adjustable) | |||
Discharge stop | 10.7V(defaul,adjustable) | |||
Discharge reconnect | 12.6V(defaul,adjustable) | |||
USB output | 5V/3A | |||
Self-consume | <10mA | |||
Operating temperature | -35°C~+60°C | |||
*all red color voltage X2 ,while using 24V system.
Connection:
1.Connect the battery to the charge regulator - plus and minus.
2.Connect the photovoltaic module to the regulator - plus and minus.
The reverse order applies when deinstalling!
An improper sequence order can damage the controller!
MUST MPPT 60A 80A 100A PC1800F Series Parallel 12V 24V 36V 48V PV 145V Solar Charge Controller For Home Use Solar Regulator
MUST PC1800F Series MPPT Solar Charge Controller (60/80/100A)
MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging.
Recommend Product
PWM solar charge controllers and PV1800 solar inverter
Features
*// LCD display , easy to operate on LCD screen
*// Multi stage charging (3-stage charging , parallel charging and equalized charging function)
*// BTS - Battery remote temperature sensor terminal
*// Enable to charge Li-thium, Gel , lead-acid battery
*// With RS485 & USB communication port
*// Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit
Product parameters
Monitoring system
PC1800F Parallel Funciton
PC1800F ports introduction
LCD display and setting
Before you using the product, pls check this step carefully. This is very important
Packing details
About MUSTShenzhen MUST ENERGY Power Co., Ltd established in 1998, with the headquarter in Hongkong, which is a professional hi-tech enterprise specialized in Power Inverter, Solar Power, VRLA Battery development, manufacturing, sales and after-service.
Our comprehensive product lines include: Power inverter, Solar inverter, Solar charge controller, Solar battery and some other related Solar products.Our products have passed SAA,CE, SONCAP certificate and IS9001 quality certificate. We are one of the authorized suppliers for China Government.
Customer review
10A 20A 30A 40A 50A 60A PWM USB Solar Charge Controller Panel Battery Regulator Intelligent 12V 24V
10A 20A 30A 40A 50A 60A PWM USB Solar Charge Controller Panel Battery Regulator Intelligent 12V 24V
Warmly Tips:
*The reverse order applies when deinstalling!
*An improper sequence order can damage the controller!
*All red color voltage X2 ,while using 24V system.
*This solar controller is not waterproof ,please install it indoor or out of the rain
Features:
1. Upgraded version of solar panel controller: Compatible with 12V 24V system. This solar charge controller helps you automatically manage the work of the solar panels and batteries in your solar system using a built-in industrial microcontroller. No need to reset when the battery runs out, because it remembers various parameters set by the user. You can also charge your phone, tablet, PC with dual USB outputs up to 5V/2.5A.
2. Safe to use: Equipped with overcurrent protection, short circuit protection, reverse connection protection, low voltage, overcharge protection, with full 3-stage PWM charging management. This 30A solar charge controller will help you safely increase system efficiency and extend battery life.
3. LCD Display: The LCD display keeps you informed of status and data. You can also easily switch modes and parameter configurations, and you can use the controller in different places such as home, industry, and business.
4. Multiple electrical protections: Built-in over current protection, short circuit protection, reverse polarity protection, open circuit protection, automatic recovery, and no damage to the controller, providing reliable protection for your equipment.
5. Good heat dissipation: Double MOSFET reverse current protection, low heat generation, all electronic components will heat up during the working process, it is best to shade them for better heat dissipation, and avoid direct sunlight or humid places.
Descriptions:
The LCD display keeps you informed of status and data. You can also easily switch modes and parameter configurations, and you can use the controller in different places such as home, industry, and business. Built-in over current protection, short circuit protection, reverse polarity protection, open circuit protection, automatic recovery, and no damage to the controller, providing reliable protection for your equipment.
MODEL | PWM-E-10A | PWM-E-20A | PWM-E-30A | PWM-E-40A | PWM-E-50A | PWM-E-60A |
Battery Voltage | 12V 24V Auto | |||||
Charging Current | 10A | 20A | 30A | 40A | 50A | 60A |
Discharging Current | 10A | 10A | 10A | 20A | 30A | 30A |
Max Solar input | 48V(for 24V battery) 24V(for 12V battery) | |||||
Equalization | 14.4V(Sealed) 14.2V(Gel) 14.6V(Flood) | |||||
Float charge | 13.7V(defaul,adjustable) | |||||
Discharge stop | 10.7V(defaul,adjustable) | |||||
Discharge reconnect | 12.6V(defaul,adjustable) | |||||
Charge reconnect | 13V | |||||
Voltage of open light | Solar Panel 8V(Light lights delay) | |||||
Voltage of close light | Solar Panel 8V(Light off delay) | |||||
USB output | 5V/3A | |||||
Self-consume | <10mA | |||||
Operating temperature | -35°C~+60°C | |||||
Size | 133.5*70*35mm | 188*90*47mm | ||||
12v 24v Solar Charge Controller Storage Lithium Lead Battery Charging Protection Board Control Switch
30/40/50/60/100A MPPT Solar Charge Controller Dual USB LCD Display 12V 24V Auto Solar Cell Panel Charger Regulator With Load
Features:
①Australia New Zealand Converter ( 2 Pin Plug Adapter)
Australia,New Zealand, Araentina.
②UK Plug Converter ( 3 Pin Flat Pin )
England , Ireland , Scotland , Hongkong , Pakistan , Singapore,Malaysia , Vietnam , etc .
③EU Plug Adapter(2 Pin Round Pin)
Most Europe countries , most Afriacan countries , most Middle East countries , South Korean Chile ,Paraguay etc.
④US Plug Adapter ( 2 Pin Flat Pin )
United State Canada , most North and South American countries , Japan PhilippinesThailand etc.
Dear buyers, we appreciate your business, if you are satisfied with our service,
please leave us a positive feedback and rate the details of the transaction (Detailed Seller Ratings) with a
"PERFECT 5 STARS".
If you have any problems, broken, quality problems, please don't worry, and don't leave bad feedback.
Please send us an email first, we will reply you as soon as possible, please allow us to respond within 12 hours.
We understand your mood, and will provide you with the best solution for your problem,
please give us the opportunity to solve the problem,
For any case,please feel free to come to us,we are always here.
look forward to and thank you for your trust.
10A 20A 30A 40A 50A 60A PWM Solar Charge Controller LCD Display Intelligent 12V 24V Panel Battery Regulator
10A 20A 30A 40A 50A 60A PWM Solar Charge Controller LCD Display Intelligent 12V 24V Panel Battery Regulator
Features of this solar charge controller
1. PWM charging mode
2. LCD Screen display
3. Set real time clock
4. Auto voltage identification
5. Light control mode,Time control mode
6. Reverse connecting protection
7. Hanging style design makes it convenient to install
8. 2 USB charging interface of 5V 2.5A.
Technical Parameter
Dual USB Port:
The solar charge controller has dual USB ports of 5V 2.5A, which can use for
different phone charge.
Solar Battery: Solar Charge controller is only suitable for lead-acid
batteries: OPEN, AGM, GEL, not for nickel hydride, lithium, Liions, or other
batteries. It has another model for lithium battery.
Easy to install and Operate: It's hanging style design can use as wall
mounted one. And this 1024 Solar controller can clearly indicate the status and
data, it can be conveniently switched to different modes and parameter
configuration
Six Functional Protections: This solar controller inludes short circuit
protection, open circuit protection, over current
protection, over charge protection, over discharge protection and reverse
polarity protection.
Good Heat Dissipation: Dual mosfet reverse current protection, low heat
production(ALL electronic components generate heat when they are running, it is
better to shelter them for better heat dissipation, avoid direct sunlight
exposure or damp place)
Descriptions:
The LCD display keeps you informed of status and data. You can also easily switch modes and parameter configurations,
and you can use the controller in different places such as home, industry, and business. Built-in over current protection,
short circuit protection, reverse polarity protection, open circuit protection, automatic recovery, and no damage to the
controller, providing reliable protection for your equipment.
MODEL | PWM-E-10A | PWM-E-20A | PWM-E-30A | PWM-E-40A | PWM-E-50A | PWM-E-60A |
Battery Voltage | 12V 24V Auto | |||||
Charging Current | 10A | 20A | 30A | 40A | 50A | 60A |
Discharging Current | 10A | 10A | 10A | 20A | 30A | 30A |
Max Solar input | 48V(for 24V battery) 24V(for 12V battery) | |||||
Equalization | 14.4V(Sealed) 14.2V(Gel) 14.6V(Flood) | |||||
Float charge | 13.7V(defaul,adjustable) | |||||
Discharge stop | 10.7V(defaul,adjustable) | |||||
Discharge reconnect | 12.6V(defaul,adjustable) | |||||
Charge reconnect | 13V | |||||
Voltage of open light | Solar Panel 8V(Light lights delay) | |||||
Voltage of close light | Solar Panel 8V(Light off delay) | |||||
USB output | 5V/3A | |||||
Self-consume | <10mA | |||||
Operating temperature | -35°C~+60°C | |||||
Size | 133.5*70*35mm | 188*90*47mm | ||||
SYSTEM CONNECTION
1. Connect the battery to the charge regulator-plus and minus.
2.Connect the photovoltaic module to the regulator-plus and minus.
3.Connect the consumer to the charge regulator-plus and minus.
The reverse order applies when deinstalling!
An improper sequence order can damage the controller!
This is NEW Solar Controller ,It can fully meet your home Photovoltaic
system(including home lighting system )requirements .It can recongize 12V and
24V Lead acid ,Gel battery automatically
There are optional 10A 20A 30A model
10A:
if your battery is 12V ,the max solar panel input is 25V 120W
if your battery is 24V ,the max solar panel input is 50V 240W
20A:
If your battery is 12V, the max solar panel input is 25V 240W
if your battery is 24V, the max solar panel input is 50V 480W
30A
if your battery is 12V ,the max solar panel input is 25V 360W
if your battery is 24V ,the max solar panel input is 50V 720W
